Southern Hydrate Ridge: This was a long dive to finish work at Southern Hydrate Ridge. ROPOS infilled the caisson for the broadband (OSBBA1010) with silica beads and installed the CAT flow meter at Einstein's Grotto, which completed this site. ROPOS photomosaicked the area and took push cores and biological samples (clams). ROPOS transited to the large collapse zone in the NW portion of the seep area and imaged/documented the site. Here, a significant discovery was made of exposed methane hydrate on the seafloor, as well as a sustained, large bubble plume issuing from a hole at the base of the near vertical wall in the collapse zone. The dive ended with taking a couple niskin bottle samples of the methane plume, a few more push cores and recovery of the tool basket. Video credit: NSF-OOI/UW/CSSF; Dive R1784; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1784_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1784_highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/r1781_highlightsnode_med.jpg', 'title':'Dive R1781 Highlights Primary Node PN1D', 'description':'This dive at Primary Node PN1D was in support of the cable ship the Dependable. The ROV ROPOS supported the installation of a 17 km extension cable extending to the Oregon Shelf Site. Huge ling cod appear to have made the node their "house", while snails (with yellow egg stalks), sea anenomes, and a variety of fish are also thriving on this "reef". Video credit: NSF-OOI/UW/CSSF; Dive R1781; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1781_highlightsnode_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1781_highlightsnode.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-09-07at7.15.08pm_med.jpg', 'title':'Dive R1779 Highlights Southern Hydrate Ridge', 'description':'During Dive R1779 at Southern Hydrate Ridge, ROPOS installed the 267 m cable (RS01W8) and connected MJ01B to LV01B. ROPOS connected junction boxes LV01B and LJ01B, and then connected all three short-period seismometers, moved the pressure sensor to its final position and plugged it into LJ01B, installed the broadband seismometer (OBSSPA103) in the caisson (still need to fill it with beads), and connected it to LJ01B. The dive ended with a sight-seeing tour of the Pinnacle. Two Niskin bottles were fired near the south end of the pinnacle by an area with very localized mats on the pinnacle. The tool basket was recovered.Video credit: NSF-OOI/UW/CSSF; Dive R1779; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1779highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1779highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-09-07at8.24.39pm_med.jpg', 'title':'Dive R1778 Highlights Oregon Offshore Mooring', 'description':'ROPOS reinstalled the LV01C junction box and the 120 m oily cable extending to the base of the Shallow Profiler Mooring. All cables were reconnected and the system was powered up. The Shallow Profiler powered up and communications were established.Video credit: NSF-OOI/UW/CSSF; Dive R1778; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1778highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1778highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/r1775_highlights_med.jpg', 'title':'Dive R1775 Highlights Oregon Offshore', 'description':'During this dive, the 120 m "oily" cable connection the junction box to the EOM cable on the Shallow Profiler Mooring was recovered. Upon inspection, the cable was found to be cross-wired. Video credit: NSF-OOI/UW/CSSF; Dive R1775; V14
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1775_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1775_highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/massspc.mosquitor1773_03336.sm.sm_med.jpg', 'title':'Dive R1773 Highlights Southern Hydrate Ridge', 'description':'The mass spectrometer MASSPA101 was installed at the same bacterial mat as the flow meter (Mosquito), and osmo sampler. Video credit: NSF-OOI/UW/CSSF; Dive R1773; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1773_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1773_highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/r1772_highlights_med.jpg', 'title':'Dive R1772 Highlights Southern Hydrate Ridge', 'description':'The tool basket was deployed with the broadband seismometer, and the CAT and Mosquito flow meters, and the Osmo fluid sampler. On launching, the CAT jumped the tool sled and fell to the seafloor. The broadband was deployed for follow-on installation, and the Mosquito and Osmo sampler were installed. Push cores were taken and a brief survey found the CAT. It was recovered and is expected to be fine as they are normally deployed by free falling. Video credit: NSF-OOI/UW/CSSF; Dive R1772; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1772_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1772_highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/r1771_highlights_med.jpg', 'title':'Dive R1771 Highlights Oregon Offshore', 'description':'This was a bounce dive that recovered the medium-power junction box MJ03B, which was temporarily deployed on the previous dive to test the Shallow Profiler Mooring. Video credit: NSF-OOI/UW/CSSF; Dive R1771; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1771_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1771_highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/r1770_highlights_med.jpg', 'title':'Dive R1770 Highlights Oregon Offshore', 'description':'The MJ03B junction box was temporarily deployed to test power load on the junction box LV01C. ROPOS plugged in the J-box and the end of the 120 m cable near the base of the mooring. At this point, LV01C was connected to Primary Node PN1C, and also connected to MJ03B to simulate the Platform Instrument Assembly on the Shallow Profiler Mooring. When the system was powered up there was a load surge and the node tripped again. Expansion port 1 and expansion port 2 were also tested. LV01C was recovered. All cables and ports were capped. Video credit: NSF-OOI/UW/CSSF; Dive R1770; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1770_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1770_highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/r1769_highlights_med.jpg', 'title':'Dive R1769 Highlights Southern Hydrate Ridge ', 'description':'During this dive, the three short-period seismometers (OBSSPA1010, OBSSPA102, OBSSPA103) were installed and connected to their extension cables. Video credit: NSF-OOI/UW/CSSF; Dive R1769; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1769_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1769_highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/junk3_med.jpg', 'title':'Dive R1768 Highlights Oregon Offshore Mooring', 'description':'During ROPOS Dive R1768, trouble shooting of the mooring was conducted. Video credit: NSF-OOI/UW/CSSF; Dive R1768; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1768highlights-desktop.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1768highlights-desktop.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/r1767highlights_med.jpg', 'title':'Dive R1767 Highlights Digital Still Camera Install', 'description':'During ROPOS Dive R1767 to Southern Hydrate Ridge, the digital still camera (CAMDSB103) was installed near the opening of Einstein's Grotto and the final placement site for the mass spectrometer, flow meters and osmo samplers were determined. Video credit: NSF-OOI/UW/CSSF; Dive R1767; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1767highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1767highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/snail.garden.squid_med.jpg', 'title':'Dive R1765 Highlights Southern Hydrate Ridge', 'description':'During this dive at the summit of Southern Hydrate Ridge the junction box LV01B was temporatily deployed ~ 50 m north of a site where the end of a 10 km extension cable will be installed. The actively venting seep Grotto was surveyed for final placement of a digital still camera on a follow-on dive. Grotto was actively venting. The Neptunea snail field was visited briefly. The ROV transited NW to the location of the broadband caisson, and on the way a carbonate rock sample was recovered. Upon reaching the broadband caisson, the ROPOS turned south on a 190° heading for a 500 m long survey of the 10 km cable route. Video credit: NSF-OOI/UW/CSSF; Dive R1765; V14.
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1765highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/jullyjunk_med.jpg', 'title':'Jellyfish 4 Video Axial Seamount', 'description':'A large red jellyfish swims gently by the ROV ROPOS at Axial Seamount.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:jelly3-v14website.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:jelly3-v14website.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/jelly_med.jpg', 'title':'Jellyfish 2 Video Axial Seamount VISIONS14', 'description':'A red jellyish pulses while drifting by the ROV ROPOS during Leg 1, VISIONS'14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:jelly2-v14website.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:jelly2-v14website.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/pia.600m.good_med.jpg', 'title':'Dive R1763 Highlights Offshore Instrument Platform', 'description':'ROPOS Dive R1763 was a historical moment, marking the first installation of an RSN Instrument Platform Assembly onto a 2-legged Shallow Profiler Mooring. The instrument platform and mooring was designed and built by the Applied Physics Laboratory at the University of Washington as part of the Regional Scale Nodes-Endurance Array effort. The 'PIA' was installed on the platform at the EA Oregon Offshore Site at a water depth of 197 m. Photo credit: NSF-OOI/UW/CSSF; Dive R1763; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1763highlights-desktop.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1763highlights-iphone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1763highlights-desktop.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/junk600_med.jpg', 'title':'Dive R1762 Highlights Oregon Offshore', 'description':'Dive R1762 at the EA Oregon Offshore Site installed and connected a 120 m 'oily' cable between junction box LV01C and the base of the EOM cable for the two-legged shallow profiler mooring. Video credit: NSF-OOI/UW/CSSF; Dive R1762; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1762highlights-desktop.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1762highlights-iphone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1762highlights-desktop.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/r1761_highlights_med.jpg', 'title':'Dive R1761 Highlights Southern Hydrate Ridge', 'description':'This dive, at Southern Hydrate Ridge, resulted in installation of the third extension cable (SUM1W4 - 604 m) for the short-period seismometers that will be installed at this site on follow-on ROPOS dives. The junction box (MJ01B), which had been used as an anchor to install the cables, was moved into position near Einstein's Grotto, and each of the three short-period extension cables was surveyed in. Video credit: NSF-OOI/UW/CSSF; Dive R1761; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1761_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1761_highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/r1760_highlights_med.jpg', 'title':'Dive R1760 Highlights Southern Hydrate Ridge', 'description':'This dive at Southern Hydrate Ridge, resulted in the installation of the extension cable SUM1W3 that extends from the position of junction box LJ01B to the short-period seismometer OBSSPA101. Video credit: NSF-OOI/UW/CSSF; Dive R1760; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1760_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1760_highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'groovy.util.ConfigObject@15133091', 'title':'Dinner Plate Jellyfish Video3', 'description':'A dinner plate jellyfish floats past the ROV ROPOS above Axial Seamount. Photo credit: NSF-OOI/UW/CSSF; V14
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:dinnerplate3-v14website.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:dinnerplate3-v14website.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-28at10.07.07am_med.jpg', 'title':'Dive R1758 Highlights Southern Hydrate Ridge', 'description':'This dive on Southern Hydrate Ridge, was focused on surveying in cable routes. The MJ01B junction box that was deployed will be used as an anchor during a follow-on installation of extension cables for short-period seismometers. The locations for installation of the LV01B and LJ01B junction boxes were surveyed in, and pallet drop site for the Dependable was determined. The dive ended with a survey of all three extension cable routes for the seismometers. One spectacular find, was the discovery of a nursery for Neptunea snails that form yellow egg stalks. Photo credit: NSF-OOI/UW/CSSF; Dive R1758; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1758_highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1758_highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1758_highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-28at10.04.23am_med.jpg', 'title':'Dive R1757 Highlights Slope Base HPIES', 'description':'During this dive as the Slope base Site, the HPIES (HPIESA101) instrument was installed and the 1283 m extension cable SBVMW3, which connects HPIES to junction box LJ01A was also installed. Video credit: NSF-OOI/UW/CSSF; Dive R1757; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1757_highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1757_highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1757_highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-25at10.07.53am_med.jpg', 'title':'Dive R1756 Hghlights Oregon Inshore Shelf Site', 'description':'Video highlights for ROPOS Dive R1756 on the Oregon Shelf starting at 80 m water depth. Marker 6 was placed for installation of the junction box MJ01C later in the program. Marker 3 was deployed at the end of the planned 17 km cable lay. The cable route was also surveyed for potential hazards or obstacles. Video credit: NSF-OOI/UW/CSSF; Dive R1756; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1756highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1756highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1756highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-25at9.58.57am_med.jpg', 'title':'Dive R1755 Highlights Slope Base Profiler Plugin', 'description':'This dive (R1755) was at the Slope Base site. ROPOS ecovered the beacon at the base of Deep Profiler, plugged in Deep Profiler DP01A to the extension cable SBVMW4. A quick survey of the cable lay to LV01A was completed. and the ROPOS Interface Box was used to test the Deep Profiler at the LV01A junction box. The beacon on the Deep Profiler to float was recovered on the end of the dive.Video credit: NSF-OOI/UW/CSSF; Dive R1755; V14
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1755highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1755highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1755highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-25at9.55.31am_med.jpg', 'title':'Dive R1754 Highlights Southern Hydrate Ridge', 'description':'ROPOS Dive R1745 to Southern Hydrate Ridge Summit. The dive verified bubbles coming out of Einstein's Grotto and documented exposed hyrate in the opening. Marker 34 was deployed 50 m south of the junction box LV01B proposed installationa site, inpreparation for the follow-on installation of the 10 km cable to PN1B and deployment of the pallet near the summit of the ridge. Video credit: NSF-OOI/UW/CSSF; Dive R1754; V14
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1754_highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1754_highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1754_highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-26at9.39.46am_med.jpg', 'title':'Dive R1753 Highlights Oregon Offshore Site 600 m', 'description':'This dive (R1753) was at the Oregon Offshore Site (~600 m waterdepth). During the dive a beacon from the 2-legged Shallow Profiling Mooring base and the 200 m platform were recovered. Video credit: NSF-OOI/UW/CSSF; Dive R1753; V14
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1753_highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1753_highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1753_highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-25at9.44.39am_med.jpg', 'title':'Dive R1752 Highlights Oregon Offshore', 'description':'ROPOS DIve R1752 was at the Oregon Offshore Site. ROPOS retreived the beacom off of the base of the Vertical Mooring EOM cable, and verified the distance between the mooring base and junction box LV01C.There was a test of the camera for a future mosaic. Video credit: NSF-OOI/UW/CSSF; Dive R1752; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1752_highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1752_highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1752_highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-25at9.40.57am_med.jpg', 'title':'Dive R1751 Highlights Slope Base Broadband', 'description':'Dive R1751 was at the Slope Base Site. During the dive, the broadband seismometer OBSBKA101 and low frequency hydrophone HYDLFA101 were installed. The 25 m extension cable running from the broadband to the Medium Powered J-Box MJ01A was connected to port J5. The current meter VEL3DB101 and pressure sensor (PRESTA101) were moved to their final positions and the extension cable (RS01W6) from LV01A to Primary Node PN1A (SP2 port) was connecte. The extension cable RS01W5 from MJ01A was connected to the Primary Node PN1A-SP3 port. Video credit: NSF-OOI/UW/CSSF; Dive R1751; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1751_highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1751_highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1751_highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/dumbo.screenshot_med.jpg', 'title':'Dumbo Video 2 Axial Seamount', 'description':'A dumbo octopus sits on a lava flow at the summit of Axial Seamount at a water depth of ~ 5000 ft beneath the seafloor. Video Credit: UW/NSF/OOI/CSSF: V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:dumbo2-v14website.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:dumbo2-v14website_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:dumbo2-v14website.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/octopus.screenshot_med.jpg', 'title':'Octopus 1 Video Axial Seamount', 'description':'An octopus sits on the edge of a small collapse zone at the summit of Axial Seamount.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:octopus1-v14website.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:octopus1-v14website_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:octopus1-v14website.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-19at2.31.12pm_med.jpg', 'title':'Dive R1750 Highlights Southern Hydrate Ridge', 'description':'During this dive at the summit of Southern Hydrate Ridge, sites around Einsteins Grotto were surveyed for follow-on instrument installations. Video credit: NSF-OOI/UW/CSSF; Dive R1750; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1750highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1750highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1750highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/big.redscreenshot2014-08-18_med.jpg', 'title':'Big Red Jellyfish Video 3 Axial Seamount', 'description':'Big Red Jellyfish at Axial Seamount. Video Credit: NSF-OOI/UW/CSSF; Dive RXXXXX; V14
', 'file':'/files/bigred3-mpeg-2fordvd-v14website.m4v'} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-15at10.19.07am_med.jpg', 'title':'Dive R1745', 'description':'Dive R1745
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1745highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1745highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1745highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-15at10.13.35am_med.jpg', 'title':'Dive R1744 Highlights Oregon Offshore', 'description':'Oregon Offshore: During Dive R1744, the low-voltage node, LV01C was installed and the extension cable RS01W9, running from Primary Node PN1C was conencted to the node. A survey of cable RS01W9 was initiated but not completed because permission was not yet give to plug into PN1C. Video credit: NSF-OOI/UW/CSSF; Dive R1744; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1744highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1744highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1744highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-15at10.03.17am_med.jpg', 'title':'Dive R1743 Highlights Oregon Offshore PN1C', 'description':'Oregon Offshore PN1C: This dive install the extension cable RS01W9 (925 m) extending from Primary Node PN1C to low voltage node LV01C. ROPOS dove on PN1C with ROCLS holding cable RS01W9. ROPOS detached from ROCLS near PN1C, cut the straps holding the doors closed onthe trawl-resistant frame of PN1C, opened the doors, and then surveyed the cable lay route. ROPOS attached the cable and the strain relief to PN1C, and then reattached to ROCLS and laid cable RS01W9 between PN1C and the LV01C site. Video credit: NSF-OOI/UW/CSSF; Dive R1743; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1743highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1743highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1743highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-11at10.02.02am_med.jpg', 'title':'Dive R1742 Highlights Axial Base Deep Profiler', 'description':'Axial Base: This dive focused on connecting the 1852 m cable (AXVMW4) running from the Low Votage Node LV03A to the Deep Profiler vertical mooring at the base of Axial Seamount, near Primary Node PN3A. The modified McLane Profiler approached the base of the mooring, and docked with the docking station to download data it had previously collected. ROPOS transited near PN3A, and connected the extension cable running from junction box LV03A (RS03W4) into the RSN/ROPOS interface box to test communications with the McLane Profiler, and also to download engineering and science data that it had collected. The cable was then connected into Primary Node PN3A. A large white octopus came to "visit" during this operation. The AXVMW4 cable was reconnected into the LV03A junction box at the end of the dive, and a beacon was removed from a large float at the top of the Deep Profiler Mooring priory to recovery of ROPOS.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1742highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1742highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1742highlightsbroadband.m4v'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-11at9.56.51am_med.jpg', 'title':'Dive R1741 Highlights Axial Summit PN3B Connection', 'description':'Axial Summit PN3B: This was a historical dive for the UW, RSN and the OOI in that all infrastructure installed at the summit of Axial Seamount was connected to Primary Node PN3B. When powered up from the Shore Station in Pacific City, Oregon, all junction boxes and instruments will have powere and two-way communication to shore. Connections started with the RS03W9 cable from Central Caldera to Science Port (SP) 1, followed by the RS03W7 cable from Ashes to SP2. Two extension cables running to the International District hydrothermal fields were then connected. The cable RS03W6 was connected to SP3, and cable RS03W8 to SP4. The cable RS03W10 from Eastern Caldera was connected to SP5. Finally the cable RS03W5 fromthe high definition camera in the ASHES hydrothermal field was connected to port SP6HB. The port SP7HB does not host a cable. Video credit: NSF-OOI/UW/CSSF; Dive R1741; V14
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1741_highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1741_highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1741_highlightsbroadband.m4v'} ]} , {'height':'540', 'width':'960', 'image':'/files/r1740_thumb_med.jpg', 'title':'Dive R1740 Highlights Axial Base Deep Profiler', 'description':'Axial Base PN3A: This was a short dive during which the ROV ROPOS attached a line to the top float on the Deep Profiler vertical mooring so that R/V Thompson could recover the mooring. Adjustments were made to the handles on the mooring and it was reinstalled - seee Dive R1742. Video credit: NSF-OOI/UW/CSSF; Dive R1740; V14
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1740_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1740_highlights.mov'} ]} , {'height':'540', 'width':'960', 'image':'/files/r1739_thumb_med.jpg', 'title':'Dive R1739 Highlights Axial Base HPIES and OBS', 'description':'Axial Base PN3A: Initial operations were at the junction box LJ03A where the CTD tripod was installed on a short 10 m cable. ROPOS then installed the HPIES (Horizontal Electroometer Pressure Inverted Echo Sounder) instrument, moved the flange box and then connected this instrument to LJ03A. ROPOS transited to the location of the Deep Profiler Mooring and collected water samples with Niskin bottles mounted on the ROV. The final tasks included installation of the broadband seismometer, low frequence hydrophone and pressure sensor at MJ03A. A caisson was installed near this site that required blowing out sediment inside the caission so that the seismometer could be installed in it and covered in silica beads. Video credit: NSF-OOI/UW/CSSF; Dive R1739; V14
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1739_highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1739_highlights.mov'} ]} , {'height':'394', 'width':'700', 'image':'/files/screenshot2014-08-07at10.58.45am_med.jpg', 'title':'Dive R1738 Highlights Axial Base', 'description':'Axial Base: The 1229 m-long AXVMW3 cable for the HPIES instrument was installed that will connect it to the Low Power Junction Box LJ03A. The cable was initially anchored to LJ03A. This instrument and J-Box are now connected to the Primary Infrastructure at Primary Node PN3A. Video credit: NSF-OOI/UW/CSSF; Dive R1738; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1738highlightsbroadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1738highlightswifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1738highlightsbroadband.m4v'} ]} , {'height':'540', 'width':'960', 'image':'/files/r1732_med.jpg', 'title':'R1732 Highlights Axial Base MJ03A Installed', 'description':'R1732 Highlights - Axial Base-PN3A: During this dive, the medium-power junction box MJ03A was installed at the Axial Base site and connected to RS03W3 (606 m) that extends to PN3A. The pressure sensor will be connected on the follow-on leg to the J-Box, and the VEL3D instrument deployed. (00:50)
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1732_highlights_broadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1732_highlights_wifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1732_highlights_broadband.m4v'} ]} , {'height':'540', 'width':'960', 'image':'/files/r1731_med.jpg', 'title':'R1731 Successful High Definition Camera Test', 'description':'ASHES Vent Field: The ROPOS/RSN Interface box was installed on ROPOS to test the high definition camera in the ASHES hydrothermal field - the camera was installed last year. The test was highly successful and video was streamed live and archived. The Applied Physics Lab was online via the live feed and VOIP phones for the test. Video looked great. At the end of the dive, the "Welch frame" was recovered. Video Credit: NSF-OOI/UW/CSSF; Dive R1731; V14 (01:19)
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1731_highlights_broadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1731_highlights_wifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1731_highlights_broadband.m4v'} ]} , {'height':'540', 'width':'960', 'image':'/files/r1730_med.jpg', 'title':'R1730 Highlights ASHES Vent Field', 'description':'ASHES Vent Field: Swapped out MJ03B and moved it just a meter or so for better stability. Installed 3-D thermistor array and Osmo sampler. Photomosaicked Mushroom installation and recovered the 3D test thermistor array (batter powered) from last year, as well as MJ03B. Video Credit: NSF-OOI/UW/CSSF; Dive R1730; V14 (02:56)
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1730_highlights_broadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1730_highlights_wifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1730_highlights_broadband.m4v'} ]} , {'height':'540', 'width':'960', 'image':'/files/r1728_med.jpg', 'title':'R1728 Highlights International District ', 'description':'International District 1: The digital still camera, RAS-PPS and pH-H2S-T instrument were deployed near EL Gordo and await complete installation on follow-on dive. Video Credit: NSF-OOI/UW/CSSF; Dive R1728; V14. (01:21)
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1728_highlights-broadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1728_highlights-wi-fi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1728_highlights-broadband.m4v'} ]} , {'height':'540', 'width':'960', 'image':'/files/r1727_med.jpg', 'title':'R1727 Highlights Central Caldera Completed', 'description':'RS03W9 Installed from Primary Node PN3B to the Central Caldera Site Installed - Completed Central Caldera Site: The 4.6 km cable, RS03W9, was successfully installed from PN3B to the Central Caldera Site. The medium powered junction box MJ03f was connected as was the bottom pressure-tilt instrument (BOTPTA301). The broadband seismometer (OBSSBA301) was installed and connected, as was the the low frequency hydrophone (HYDFA305). Video Credit: NSF-OOI/UW/CSSF; Dive R1727; V14. (02:31)
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1727highlights_broadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1727highlights_wifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1727highlights_broadband.m4v'} ]} , {'height':'540', 'width':'960', 'image':'/files/r1726_med.jpg', 'title':'R1726 Highlights Central Caldera Site', 'description':'Central Caldera Site: Deployed the bottom pressure-tilt instrument (BOTPTA301) at Central Caldera for later connection to MJ03F node. Video Credit: NSF-OOI/UW/CSSF; Dive R1726; V14. (00:40)
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsn/mp4:r1726highlights_broadband.m4v/playlist.m3u8'}, {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1726highlights_wifi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1726highlights_broadband.m4v'} ]} , {'height':'540', 'width':'960', 'image':'/files/screenshot2014-07-25at12.14.43pm_med.jpg', 'title':'R1724 Highlights Central Caldera Install', 'description':'Central Caldera Site: Deployed MJ03F at the projected end of the extension cable (~4.6 km) RS03W9 lay running from PN3B to the Central Caldera Site. A survey was also completeed for suitable flat area for landing cable/ROCLS during the follow-on cable installation. Video credit: NSF-OOI/UW/CSSF; Dive R1724; V14. (01:11)
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1724highlights_phone.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1724highlights.mov'} ]} , {'height':'540', 'width':'960', 'image':'/files/screenshot2014-07-20at12.54.00pm_med.jpg', 'title':'R1716 Highlights Axial Base ROCLS Recovery', 'description':'During ROPOS Dive R1716, the 1 km extension cable from PN1A at the base of Axial Seamount was connected to the LV01A junction box that will feed two moorings at this site. In addition, the ROCLS cable laying drum/assembly was recovered. Video credit: NSF-OOI/UW/CSSF; Dive R1716; V14. (02:22)
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1716highlights-wi-fi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1716highlights.mov'} ]} , {'height':'540', 'width':'960', 'image':'/files/screenshot2014-07-20at12.17.06pm_med.jpg', 'title':'R1715 Laying Cable at the Base of Axial Seamount ', 'description':'Axial Base PN3A. During ROPOS Dive R1715, a 1 km cable was installed at the base of Axial Seamount near Primary Node PN3A using the Remotely Operated Cable Laying System (ROCLS) mounted to the underbelly of ROPOS. Video credit: NSF-OOI/UW/CSSF; Dive R1715; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1715_highlights_wifi-wi-fi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1715highlights.mov'} ]} , {'height':'540', 'width':'960', 'image':'/files/screenshot2014-07-20at11.15.14am_med.jpg', 'title':'R1714 Highlights Axial Base', 'description':'During this dive, ROPOS dove to 2600 meters at the base of Axial Seamount, near PN3A. The low-power junction box LV03A was installed by PN3A. It will be used as strain relief anchor during a follow-on dive when the extension cable RS03W4 is installed. Surveyed PN3A area and located P1 end of RS03W3 cable.Video credit: NSF-OOI/UW/CSSF; Dive R1714; V14.
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1714_highlights-wi-fi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1714highlights.mov'} ]} , {'height':'540', 'width':'960', 'image':'/files/screenshot2014-07-20at10.38.36am_med.jpg', 'title':'R1713 Highlights International District Vent Field', 'description':'Highlights during ROPOS dive R1713 in the International District Vent Field during the VISIONS14 Expedition. Video credit: NSF-OOI/UW/CSSF; Dive R1713; V14. (01:44)
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1713_highlights_wifi-wi-fi.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1713highlights.mov'} ]} , {'height':'540', 'width':'960', 'image':'/files/r1712-highlights-large-540p_med.jpg', 'title':'R1712 Highlights RS03W9 Cable Work', 'description':'R1712 Highlights:The R/V Thompson arrived on site at 0900 July 15 and commenced preparation for the first ROPOS Dive (R1712) at the summit of Axial Seamount (PN3B).
Dive R1712 began at 0330 (local time). The main goals of this dive were to cut and recover the FACTs and wetmate connectors at each end of the ~ 5 km cable extending from Primary Node PN3B to the Central Caldera; cut and move pieces of the older cable away from the work site for later recovery; and install an empty junction box to be used as an anchor for a follow-on cable lay. The older cable (RS03W9) is the cable that had hockles in it as laid in 2013. At the end of the dive, a survey was conducted at the Central Caldera Site to prepare for installation of the MJ03F junction box and associated sensors. Video credit: NSF-OOI/UW/CSSF; Dive R1712; V14. (03:31)
', sources: [ {'file': 'https://stream.ocean.washington.edu:443/rsnPhone/mp4:r1712-highlights-small540p.m4v/playlist.m3u8'}, {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:r1712-highlights-large-540p.mov'} ]} ];